Camshaft Inspection - KYMCO VENOX 250 Service Manual

6
. CYLINDER HEAD/VALVES
Remove the camshaft holder and dowel pins.
Remove the camshaft gear from the cam
chain and remove the camshaft.
Suspend the cam chain with a piece of
wire to keep it from falling into the
crankcase.

CAMSHAFT INSPECTION

Check each cam for wear or damage.
Measure the cam height.
Service Limits:
Front IN : 34.40mm replace if below
EX: 34.40mm replace if below
Rear IN : 34.40mm replace if below
EX: 34.40mm replace if below
Check each camshaft for wear or damage.
Measure the camshaft height.
Service Limits:
R camshaft: 23.90mm
C camshaft: 23.80mm
L camshaft: 23.90mm
Cam Chain
Camshaft Gear
R Camshaft
C Camshaft
VENOX 250
Dowel Pins
Camshaft
L Camshaft
6-6