Transmission Fork/Drum - KYMCO VENOX 250 Service Manual

10
.TRANSMISSION SYSTEM
Remove the transmission fork shaft and
transmission forks.
Remove the transmission drum.
INSPECTION

TRANSMISSION FORK/DRUM

Inspect each transmission fork for bending
or damage.
Measure each transmission fork claw
thickness.
Service Limit: 5.0mm replace if below
Measure each transmission fork shaft hole
I.D.
Service Limit: 12.053mm replace if over
Check the transmission fork shaft for
bending or damage.
Measure the transmission fork shaft O.D.
Service Limit: 11.92mm replace if below
Inspect the transmission drum for scratches
or poor lubrication.
Check the transmission drum grooves for
damage.
Check the bearing for excessive free play.
Measure the transmission drum O.D.
Service Limits:
Left end : 11.926mm replace if below
Right end: 24.90mm replace if below
Check the transmission drum and
transmission fork shaft holes in the lower
crankcase for wear or damage.
10-7
Transmission Fork
Transmission Drum
Left
VENOX
Transmission Fork Shaft
Right
250