12
. FRONT WHEEL/SUSPENSION/STEERING
VENOX
250
Throttle Housing
HANDLEBAR
REMOVAL
Remove two screws attaching the throttle
housing and the throttle housing.
Screws
Master Cylinder
Throttle Pipe
Disconnect the throttle cable from the
throttle grip and then remove the throttle
pipe from the handlebar.
Throttle Cable
Bolts
Remove the two master cylinder holder
bolts and the master cylinder.
Holder
Remove the two left handlebar switch
housing screws and the housing.
Remove the two clutch lever holder bolts
and the clutch lever holder.
Screws
12-4