Steering Stem - KYMCO VENOX 250 Service Manual

12
. FRONT WHEEL/SUSPENSION/STEERING
Remove the two bolts attaching the brake
caliper holder.
Remove the two headlight holder screws.
Remove the upper fork bridge mount bolt.
Remove the turn signal light holder screw.
Remove the lower fork bridge mount bolt
and then remove the right and left front
forks.
INSTALLATION
The installation sequence is the reverse of
removal.

STEERING STEM

REMOVAL
Remove the handlebar.
Remove the front fork tubes.
Remove the steering stem nut by using the
lock nut wrench.
Special
Lock nut wrench
Remove the steering head top nut, top cone
race, steering stem and steel balls.
Special
Steering stem wrench
12-11
Bolts
Upper Fork Bridge
Mount Bolt
Headlight Holder
Screws
Lock Nut Wrench
VENOX 250
Brake Caliper
Signal Light Holder
Screw
Lower Fork Bridge
Mount Bolt
Steering Stem Wrench