Ignition Switch/Steering&Handlebar Lock - KYMCO VISA R 110 Owner's Manual

SECTION 2 - CONTROLS&FEATURES
(1) IGNITION SWITCH/STEERING&HANDLEBAR LOCK
 ON : At th is position, power is connected to start the
engine. The key cannot be taken out.
 OFF :At this position, power is cut off and the engine
stops. The key can be taken out.
 LOCK :At this position, the steering handlebar is locked.
The key can be taken out
Locking Method
Turn the steering handlebar left to the full and then push
and tum the ignition switch key left to the ''LOCK"
position ,the handlebar can be locked.
Unlocking Method
Tum the ignition switch key right to the "OFF" and the
"LOCK" is released automatically.
After locking, turn the handlebar gently to make sure that
it is locked.
Do not tum the ignition switch to the "LOCK" Position
during riding, otherwise the handlebar will be out of
control and cause accidents.
Don't park your motorcycle at a place to hinder the traffic
.
9