Hydraulic Brake; Service Information - KYMCO VENOX 250 Service Manual

14

. HYDRAULIC BRAKE

SERVICE INFORMATION

GENERAL INSTRUCTIONS
• Drain the brake fluid from the hydraulic brake system before disassembly.
• Do not allow any foreign matters entering the brake reservoir when filling the brake reservoir
with brake fluid.
• Be careful not to splash brake fluid on any coated surfaces and instrument covers to avoid
damage.
• Inspect the brake operation before riding.
• Brake fluid will damage painted, coated surfaces and plastic parts. When working with brake
fluid, use towel to cover and protect painted, rubber and plastic parts. Wipe off any splash of
brake fluid with a clean towel. Do not wipe the motorcycle with a towel contaminated by brake
fluid.
• Make sure to use recommended brake fluid DOT-4. Use of other unspecified brake fluids may
cause brake failure.
SPECIFICATIONS
Brake disk thickness
Brake disk runout
Brake master cylinder I.D.
Brake master cylinder piston O.D.
Item Standard (mm) Service Limit (mm)
5.0
0.15
12.70～12.743
12.657～12.684
VENOX 250
3.0
0.3
12.75
12.64
14-2