KYMCO VENOX 250 Service Manual page 134

11
. COOLING SYSTEM
Remove the two bolts and separate the
thermostat housing halves.
Torgue: 0.8~1.2 kg-m
Remove the thermostat from the thermostat
housing.
THERMOSTAT INSPECTION
Suspend the thermostat in a pan of water
over a burner and gradually raise the water
temperature to check its operation.
Technical Data
Begins to open
Full-open
Valve lift
• Do not let the thermostat touch the pan
as it will give a false reading.
• Replace the thermostat if the valve
stays open at room temperature.
•Test the thermostat after it is opened for
about 5 minutes and holds the
temperature at 70 .
11-9
80±2
90
3.5～4.5mm
Bolts
Thermostat
Thermostat
Thermosensor
VENOX 250
Thermostat
Thermometer