KYMCO VENOX 250 Service Manual page 109

9
. CLUTCH/GEAR SHIFT MECHANISM
Measure the starter gear shaft O.D. and I.D.
Service Limit: O.D. 42.0mm replace if
over.
I.D. 32.20mm replace if
below.
Remove the one-way clutch rollers,
plungers and springs.
Check the one-way clutch bearing for
smooth turning.
Replace a new needle bearing if noisy or
loosely.
Remove the starter reduction gear.
9-5
One-Way Clutch
Bearing
Reduction Gear
VENOX 250