18
. LIGHTS/INSTRUMENT/SWITCHES/HORN
THROTTLE POSITION SENSOR
Disconnect the throttle position sensor wire
coupler on carburetor.
Check for the resistance among three wires
of the throttle position sensor.
V/R
V/R
V/G
4~6
V/B
SIDE STAND SWITCH
Disconnect the side stand switch wire
coupler.
Check for continuity with the tester
probe connected to Yellow/Black lead and
the
probe to Green lead.
Item
OFF
(When
the
side-
stand is up)
ON
(When
the
side-
stand is down)
OIL PRESSURE SWITCH
REMOVAL
Disconnect the switch wire coupler.
Remove the oil pressure switch.
INSTALL
Install the oil pressure switch.
Connect the switch wire coupler.
Make sure the tap on the oil pressure
switch into the groove in the switch wire
coupler.
18-9
Unit:KΩ
V/G
V/B
4~6
0~5±1
0~5±1
Yellow/Black
Green
( ) probe
( ) probe
No continuity
Continuity
Throttle Position Sensor
Side Stand Switch Wire Coupler