Table of Contents
Advertisement
3
Configuring the Switch
• Operation Code Version – Version number of runtime code.
• Role – Shows that this switch is operating as Master or Slave
These additional parameters are displayed for the CLI.
• Unit ID – Unit number in stack
• Redundant Power Status – Displays the status of the redundant power supply.
Web – Click System, Switch Information.
CLI – Use the following command to display version information.
Console#show version
Unit 1
Serial number:
Hardware version:
EPLD version:
Number of ports:
Main power status:
Redundant power status:
Agent (master)
Unit ID:
Loader Version:
Boot ROM Version:
Operation Code Version:
Console#
2. Stacking is not supported in the current firmware.
3-14
2
.
Figure 3-4 Switch Information
S447014288
R01A
0.03
28
up
not present
1
1.0.1.4
1.0.1.6
3.1.0.18
2
.
4-62
Advertisement
Table of Contents
