Icmp Statistics; Figure 3-124 Ip Statistics - Edge-Core ES3628C Management Manual

Web - Click IP, Statistics, IP.
CLI - See the example on page 3-216.

ICMP Statistics

Internet Control Message Protocol (ICMP) is a network layer protocol that transmits
message packets to report errors in processing IP packets. ICMP is therefore an
integral part of the Internet Protocol. ICMP messages may be used to report various
situations, such as when a datagram cannot reach its destination, when the gateway
does not have the buffering capacity to forward a datagram, and when the gateway
can direct the host to send traffic on a shorter route. ICMP is also used by routers to
feed back information about more suitable routes (i.e., the next hop router) to use for
a specific destination.
Parameter
Messages
Errors
Destination Unreachable
Time Exceeded
Parameter Problems
Source Quenches
Redirects
Echos
Echo Replies

Figure 3-124 IP Statistics

Table 3-19 ICMP Statistics
Description
The total number of ICMP messages which the entity received/sent.
The number of ICMP messages which the entity received/sent but
determined as having ICMP-specific errors (bad ICMP checksums, bad
length, etc.).
The number of ICMP Destination Unreachable messages received/sent.
The number of ICMP Time Exceeded messages received/sent.
The number of ICMP Parameter Problem messages received/sent.
The number of ICMP Source Quench messages received/sent.
The number of ICMP Redirect messages received/sent.
The number of ICMP Echo (request) messages received/sent.
The number of ICMP Echo Reply messages received/sent.
3
IP Routing
3-219