Table of Contents
Advertisement
Table 4-49 show interfaces switchport - display description
Field
Broadcast threshold
LACP status
Ingress/Egress rate limit
VLAN membership mode Indicates membership mode as Trunk or Hybrid (page 4-191).
Ingress rule
Acceptable frame type
Native VLAN
Priority for untagged traffic Indicates the default priority for untagged frames (page 4-206).
GVRP status
Allowed VLAN
Forbidden VLAN
Description
Shows if broadcast storm suppression is enabled or disabled; if enabled it also
shows the threshold level (page 4-148).
Shows if Link Aggregation Control Protocol has been enabled or disabled
(page 4-159).
Shows if rate limiting is enabled, and the current rate limit (page 4-156).
Shows if ingress filtering is enabled or disabled (page 4-192).
Shows if acceptable VLAN frames include all types or tagged frames only
(page 4-192).
Indicates the default Port VLAN ID (page 4-193).
Shows if GARP VLAN Registration Protocol is enabled or disabled
(page 4-203).
Shows the VLANs this interface has joined, where "(u)" indicates untagged and
"(t)" indicates tagged (page 4-194).
Shows the VLANs this interface can not dynamically join via GVRP
(page 4-195).
Interface Commands
4
4-153
Advertisement
Table of Contents
