Table of Contents
Advertisement
4
Command Line Interface
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#ip domain-name sample.com
Console(config)#end
Console#show dns
Domain Lookup Status:
DNS disabled
Default Domain Name:
.sample.com
Domain Name List:
Name Server List:
Console#
Related Commands
ip domain-list (4-138)
ip name-server (4-139)
ip domain-lookup (4-140)
ip domain-list
This command defines a list of domain names that can be appended to incomplete
host names (i.e., host names passed from a client that are not formatted with dotted
notation). Use the no form to remove a name from this list.
Syntax
[no] ip domain-list name
name - Name of the host. Do not include the initial dot that separates the
host name from the domain name. (Range: 1-64 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Domain names are added to the end of the list one at a time.
• When an incomplete host name is received by the DNS server on this switch,
it will work through the domain list, appending each domain name in the list to
the host name, and checking with the specified name servers for a match.
• If there is no domain list, the domain name specified with the ip domain-name
command is used. If there is a domain list, the default domain name is not used.
4-138
Advertisement
Table of Contents
