Figure 3-102 Igmp Interface Settings - Edge-Core ES3628C Management Manual

3
Configuring the Switch
Web – Click IP, IGMP, Interface Settings. Specify each interface that will support
IGMP (Layer 3), specify the IGMP parameters for each interface, then click Apply.
CLI – This example configures the IGMP parameters for VLAN 1.
Console(config)#interface vlan 1
Console(config-if)#ip igmp
Console(config-if)#ip igmp last-memb-query-interval 10
Console(config-if)#ip igmp max-resp-interval 20
Console(config-if)#ip igmp query-interval 100
Console(config-if)#ip igmp robustval 3
Console(config-if)#ip igmp version 1
Console(config-if)#end
Console#show ip igmp interface vlan 1
Vlan 1 is up
IGMP is enable, version is 2
Robustness variable is 2
Query interval is 125 sec
Query Max Response Time is 10 sec, Last Member Query Interval is 1 sec
Querier is 10.1.0.253
Console#
3-180

Figure 3-102 IGMP Interface Settings

4-190
4-236
4-239
4-238
4-238
4-237
4-240
4-240