Table of Contents
Advertisement
Command Usage
• For a description of the items shown by this command, refer to "Displaying
System Information" on page 3-12.
• The POST results should all display "PASS." If any POST test indicates
"FAIL," contact your distributor for assistance.
Example
Console#show system
System Description: 24FE+4GE L2/3/4 Standalone Switch
System OID String: 1.3.6.1.4.1.259.6.10.75
System information
System Up Time:
System Name:
System Location:
System Contact:
MAC Address (Unit1):
Web Server:
Web Server Port:
Web Secure Server:
Web Secure Server Port:
Telnet Server:
Telnet Server Port:
Jumbo Frame:
POST Result:
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device 1 Test ............ PASS
Switch Int Loopback Test ..... PASS
Done All Pass.
Console#
show users
Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The session used to execute this command is indicated by a "*" symbol next to
the Line (i.e., session) index number.
System Management Commands
0 days, 1 hours, 16 minutes, and 44.47 seconds
[NONE]
[NONE]
[NONE]
00-30-F1-FD-E2-40
Enabled
80
Enabled
443
Enable
23
Disabled
4
4-61
Advertisement
Table of Contents
