Table of Contents
Advertisement
show ip route
This command displays information in the IP routing table.
Syntax
show ip route [config | address [netmask]]
• config – Displays all static routing entries.
• address – IP address of the destination network, subnetwork or host for
which routing information is to be displayed.
• netmask - Network mask for the associated IP subnet. This mask identifies
the host address bits used for routing to specific subnets.
Command Mode
Privileged Exec
Command Usage
If the address is specified without the netmask parameter, the router displays
all routes for the corresponding natural class address (page 4-258).
Example
Console#show ip route
Ip Address
--------------- --------------- --------------- ---------- ------ ---------
0.0.0.0
10.2.48.2
10.2.5.6
10.3.9.1
Total entry: 4
Console#
Field
Description
Ip Address
IP address of the destination network, subnetwork, or host. Note that the address 0.0.0.0
indicates the default gateway for this router.
Netmask
Network mask for the associated IP subnet.
Next Hop
IP address of the next hop (or gateway) used for this route.
Protocol
The protocol which generated this route information. (Values: static, local, RIP, OSPF)
Metric
Cost for this interface.
Interface
VLAN interface through which this address can be reached.
Netmask
Next Hop
0.0.0.0
255.255.252.0
255.255.255.0
255.255.255.0
Table 4-84 show ip route - display description
IP Routing Commands
Protocol
10.2.48.102
static
10.2.48.16
local
10.2.8.12
10.2.9.254 OSPF-intra
Metric Interface
0
0
RIP
1
2
4
1
1
2
3
4-253
Advertisement
Table of Contents
