Field
Routing Process with ID
Supports only single TOS (TOS0) route
It is an router type
Number of areas in this router
Area identifier
Number of interfaces
SPF algorithm executed
show ip ospf border-routers
This command shows entries in the routing table that lead to an Area Border Router
(ABR) or Autonomous System Boundary Router (ASBR).
Command Mode
Privileged Exec
Example
Console#show ip ospf border-routers
Destination
--------------- --------------- ------ ----- -------- --------------- -------
10.1.1.252
10.2.6.252
Console#
Table 4-91 show ip ospf border-routers - display description
Field
Destination
Next Hop
Cost
Type
RteType
Area
SPF No
Table 4-90 show ip ospf - display description
Description
Router ID
Type of service is not supported, so you can only assign one cost
per interface
The types displayed include internal, area border, or
autonomous system boundary routers
The number of configured areas
The area address, and area type if backbone, NSSA or stub
The number of interfaces attached to this area
The number of times the shortest path first algorithm has been
executed for this area
Next Hop
Cost
10.1.1.253
10.2.9.253
Description
Identifier for the destination router
IP address of the next hop toward the destination
Link metric for this route
Router type of the destination; either ABR, ASBR or both
Route type; either intra-area or interarea route (INTRA or INTER)
The area from which this route was learned
The number of times the shortest path first algorithm has been executed for this
route
IP Routing Commands
Type
RteType
0
ABR
INTRA
0
ASBR
INTER
4
Area
SPF No
10.1.0.0
3
10.2.0.0
7
4-285