Table of Contents
Advertisement
3
Configuring the Switch
Web – Click IGMP Snooping, IGMP Configuration. Adjust the IGMP settings as
required, and then click Apply. (The default settings are shown below.)
CLI – This example modifies the settings for multicast filtering, and then displays the
current status.
Console(config)#ip igmp snooping
Console(config)#ip igmp snooping querier
Console(config)#ip igmp snooping query-count 10
Console(config)#ip igmp snooping query-interval 100
Console(config)#ip igmp snooping query-max-response-time 20
Console(config)#ip igmp snooping query-time-out 300
Console(config)#ip igmp snooping version 2
Console(config)#exit
Console#show ip igmp snooping
Service status:
Querier status:
Query count:
Query interval:
Query max response time: 20 sec
Router port expire time: 300 sec
IGMP snooping version:
Console#
3-172
Figure 3-97 IGMP Configuration
Enabled
Enabled
10
100 sec
Version 2
4-228
4-231
4-232
4-232
4-233
4-234
4-229
4-230
Advertisement
Table of Contents
