show map ip precedence
This command shows the IP precedence priority map.
Syntax
show map ip precedence [interface]
interface
• ethernet unit/port
- unit - Stack unit
- port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-12)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show map ip precedence ethernet 1/5
Precedence mapping status: disabled
Port
Precedence COS
--------- ---------- ---
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Console#
Related Commands
map ip precedence (Global Configuration) (4-213)
map ip precedence (Interface Configuration) (4-214)
58. Stacking is not supported in the current firmware.
58
. (Range: 1-1)
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
Priority Commands
4
4-217