Figure 3-111 Dhcp Server Pool - Host Configuration - Edge-Core ES3628C Management Manual

24 10/100 ports + 4ge intelligent layer 2/3/4 fast ethernet switch
Table of Contents

Advertisement

3
Configuring the Switch
Configuring a Host Address Pool
Web – Click DHCP, Server, Pool Configuration. Click the Configure button for any
entry. Click the radio button for "Host." Enter the IP address, subnet mask, and
hardware address for the client device. Configure the optional parameters such as
gateway server and DNS server. Then click Apply.
CLI – This example configures a host address pool.
Console(config)#ip dhcp pool mgr
Console(config-dhcp)#host 10.1.0.19 255.255.255.0
Console(config-dhcp)#hardware-address 00-e0-29-94-34-28 ethernet
Console(config-dhcp)#client-identifier text bear
Console(config-dhcp)#default-router 10.1.0.253
Console(config-dhcp)#dns-server 10.2.3.4
Console(config-dhcp)#netbios-name-server 10.1.0.33
Console(config-dhcp)#netbios-node-type hybrid
Console(config-dhcp)#domain-name example.com
Console(config-dhcp)#bootfile wme.bat
Console(config-dhcp)#next-server 10.1.0.21
Console(config-dhcp)#lease infinite
Console(config-dhcp)#
3-194

Figure 3-111 DHCP Server Pool - Host Configuration

4-126
4-132
4-134
4-133
4-127
4-128
4-130
4-131
4-128
4-129
4-129
4-131

Advertisement

Table of Contents
loading

Table of Contents