Table of Contents
Advertisement
3
Configuring the Switch
Object Label
Private Traps
swPowerStatus
ChangeTrap
swFanFailureTrap
swFanRecoverTrap
swIpFilterRejectTrap
swSmtpConnFailure
Trap
swMainBoardVer
MismatchNotificaiton
swModuleVer
MismatchNotificaiton
swThermalRising
Notification
swThermalFalling
Notification
swModuleInsertion
Notificaiton
swModuleRemoval
Notificaiton
* These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps on the
SNMP Configuration menu (page 3-42).
3-50
Table 3-5 Supported Notification Messages (Continued)
Object ID
1.3.6.1.4.1.259.6.10.75.2.1.0.1
1.3.6.1.4.1.259.6.10.75.2.1.0.17 This trap is sent when the fan fails.
1.3.6.1.4.1.259.6.10.75.2.1.0.18 This trap is sent when the fan failure has
1.3.6.1.4.1.259.6.10.75.2.1.0.40 This trap is sent when an incorrect IP address is
1.3.6.1.4.1.259.6.10.75.2.1.0.41 This trap is triggered if the SMTP system cannot
1.3.6.1.4.1.259.6.10.75.2.1.0.56 This trap is sent when the slave board version is
1.3.6.1.4.1.259.6.10.75.2.1.0.57 This trap is sent when the slide-in module
1.3.6.1.4.1.259.6.10.75.2.1.0.58 This trap is sent when the temperature exceeds
1.3.6.1.4.1.259.6.10.75.2.1.0.59 This trap is sent when the temperature falls below
1.3.6.1.4.1.259.6.10.75.2.1.0.60 This trap is sent when a module is inserted.
1.3.6.1.4.1.259.6.10.75.2.1.0.61 This trap is sent when a module is removed.
Description
This trap is sent when the power state changes.
recovered.
rejected by the IP Filter.
open a connection to the mail server
successfully.
mismatched with the master board version. This
trap binds two objects, the first object indicates
the master version, whereas the second
represents the slave version.
version is mismatched with the main board
version.
the switchThermalActionRisingThreshold.
the switchThermalActionFallingThreshold.
Advertisement
Table of Contents
