Routing Information Protocol (Rip); Router Rip; Table 4-86 Routing Information Protocol Commands - Edge-Core ES3628C Management Manual

4
Command Line Interface

Routing Information Protocol (RIP)

Table 4-86 Routing Information Protocol Commands

Command

router rip

timers basic
network
neighbor
version
ip rip receive version
ip rip send version
ip split-horizon
ip rip authentication key Enables authentication for RIP2 packets and specifies keys
ip rip authentication
mode
show rip globals
show ip rip
router rip
This command enables Routing Information Protocol (RIP) routing for all IP
interfaces on the router. Use the no form to disable it.
Syntax
[no] router rip
Command Mode
Global Configuration
Default Setting
Disabled
Command Usage
• RIP is used to specify how routers exchange routing table information.
• This command is also used to enter router configuration mode.
Example
Console(config)#router rip
Console(config-router)#
Related Commands
network (4-258)
4-256
Function
Enables the RIP routing protocol
Sets basic timers, including update, timeout, garbage collection RC
Specifies the network interfaces that are to use RIP routing
Defines a neighboring router with which to exchange information RC
Specifies the RIP version to use on all network interfaces (if not
already specified with a receive version or send version
command)
Sets the RIP receive version to use on a network interface
Sets the RIP send version to use on a network interface
Enables split-horizon or poison-reverse loop prevention
Specifies the type of authentication used for RIP2 packets
Displays global configuration settings and statistics for RIP
Displays RIP configuration information for each network interface PE
Mode Page
GC 4-256
4-257
RC 4-258
4-258
RC 4-259
IC 4-260
IC 4-261
IC 4-262
IC 4-262
IC 4-263
PE 4-264
4-264