Ip Igmp Snooping Vlan Mrouter; Show Ip Igmp Snooping Mrouter - Edge-Core ES3628C Management Manual

24 10/100 ports + 4ge intelligent layer 2/3/4 fast ethernet switch
Table of Contents

Advertisement

ip igmp snooping vlan mrouter

This command statically configures a multicast router port. Use the no form to
remove the configuration.
Syntax
[no] ip igmp snooping vlan vlan-id mrouter interface
• vlan-id - VLAN ID (Range: 1-4094)
• interface
• ethernet unit/port
- unit - Stack unit
- port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-12)
Default Setting
No static multicast router ports are configured.
Command Mode
Global Configuration
Command Usage
Depending on your network connections, IGMP snooping may not always be
able to locate the IGMP querier. Therefore, if the IGMP querier is a known
multicast router/switch connected over the network to an interface (port or
trunk) on your router, you can manually configure that interface to join all the
current multicast groups.
Example
The following shows how to configure port 11 as a multicast router port within VLAN 1:
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11
Console(config)#

show ip igmp snooping mrouter

This command displays information on statically configured and dynamically learned
multicast router ports.
Syntax
show ip igmp snooping mrouter [vlan vlan-id]
vlan-id - VLAN ID (Range: 1-4094)
Default Setting
Displays multicast router ports for all configured VLANs.
Command Mode
Privileged Exec
62. Stacking is not supported in the current firmware.
62
. (Range: 1-1)
Multicast Filtering Commands
4
4-235

Advertisement

Table of Contents
loading

Table of Contents