Displaying Vrrp Group Statistics - Edge-Core ES3628C Management Manual

24 10/100 ports + 4ge intelligent layer 2/3/4 fast ethernet switch
Table of Contents

Advertisement

CLI – This example displays counters for protocol errors for all the VRRP groups
configured on this switch.
Console#show vrrp router counters
VRRP Packets with Invalid Checksum : 0
VRRP Packets with Unknown Error
VRRP Packets with Invalid VRID
Console#

Displaying VRRP Group Statistics

The VRRP Group Statistics page displays counters for VRRP protocol events and
errors that have occurred on a specific VRRP interface.
Field Attributes
• VLAN ID – ID of a VLAN configured with an IP interface. (Range: 1-4094; Default: 1)
• VRID – VRRP group identifier. (Range: 1-255)
• Times Become Master – Number of times this router has transitioned to master.
• Received Packets – Number of VRRP advertisements received by this router.
• Error Interval Packets – Number of VRRP advertisements received for which the
advertisement interval is different from the one configured for the local virtual router.
• Authentication Failures – Number of VRRP packets received that do not pass the
authentication check.
• Error IP TTL Packets – Number of VRRP packets received by the virtual router with
IP TTL (Time-To-Live) not equal to 255.
• Received Priority 0 Packets – Number of VRRP packets received by the virtual
router with priority set to 0.
• Error Packet Length Packets – Number of packets received with a packet length
less than the length of the VRRP header.
• Invalid Type Packets – Number of VRRP packets received by the virtual router
with an invalid value in the "type" field.
• Error Address List Packets – Number of packets received for which the address
list does not match the locally configured list for the virtual router.
• Invalid Authentication Type Packets – Number of packets received with an
unknown authentication type.
• Mismatch Authentication Type Packets – Number of packets received with "Auth
Type" not equal to the locally configured authentication method.
• Sent Priority 0 Packets – Number of VRRP packets sent by the virtual router with
priority set to 0.
Configuring Router Redundancy
: 0
: 0
3
4-324
3-203

Advertisement

Table of Contents
loading

Table of Contents