Table 4-49 Show Interfaces Switchport - Display Description - Edge-Core ES4625 Management Manual

Example
This example shows the configuration setting for port 4.
Console#show interfaces switchport ethernet 1/4
Broadcast threshold:
LACP status:
Ingress rate limit:
Egress rate limit:
VLAN membership mode:
Ingress rule:
Acceptable frame type:
Native VLAN:
Priority for untagged traffic: 0
GVRP status:
Allowed VLAN:
Forbidden VLAN:
Console#

Table 4-49 show interfaces switchport - display description

Field
Broadcast threshold
LACP status
Ingress/Egress rate limit
VLAN membership mode Indicates membership mode as Trunk or Hybrid (page 4-191).
Ingress rule
Acceptable frame type
Native VLAN
Priority for untagged traffic Indicates the default priority for untagged frames (page 4-206).
GVRP status
Allowed VLAN
Forbidden VLAN
Enabled, 500 packets/second
Disabled
Disable, 1000M bits per second
Disable, 1000M bits per second
Hybrid
Disabled
All frames
1
Disabled
1(u),
Description
Shows if broadcast storm suppression is enabled or disabled; if enabled it also
shows the threshold level (page 4-149).
Shows if Link Aggregation Control Protocol has been enabled or disabled
(page 4-159).
Shows if rate limiting is enabled, and the current rate limit (page 4-156).
Shows if ingress filtering is enabled or disabled (page 4-192).
Shows if acceptable VLAN frames include all types or tagged frames only
(page 4-192).
Indicates the default Port VLAN ID (page 4-193).
Shows if GARP VLAN Registration Protocol is enabled or disabled
(page 4-203).
Shows the VLANs this interface has joined, where "(u)" indicates untagged and
"(t)" indicates tagged (page 4-194).
Shows the VLANs this interface can not dynamically join via GVRP
(page 4-195).
Interface Commands
4
4-153