Table of Contents
Advertisement
Beeper
Beeper
Usage:
Can be used as an audible verification that either a good read or a noread
has occurred.
Definition:
A beep is emitted either after each good read of a bar code symbol or
after each noread.
Note: Beeper will also sound if any of the following occur:
• the scanner is defaulted
• a send/save command from ESP or an Exit command from any
embedded menu
• a <Z>, <Zp>, <Zd>, or <KS,1> command is sent
Beeper Status
Serial Cmd:
<Kustatus,volume>
Default:
On Good
Options:
0 = On Good Read
1 = On Noread
Beeper Volume
Serial Cmd:
<Kustatus,volume>
Default:
Level 4
Options:
0 = Off
1 = Level 1
2 = Level 2
MS-820 Industrial Bar Code Scanner User's Manual
6-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3 = Level 3
4 = Level 4
5 = Level 5
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-820 and is the answer not in the manual?