Symptom: Washer Will Not Spin Properly - ALLIANCE AA9231 Service

To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.

70. SYMPTOM: WASHER WILL NOT SPIN PROPERLY

Broken, loose or incorrect
120 Volts between terminal "N.O."
on motor relay K3 and "P1"
(neutral) with loading door closed
and power cord plugged in?
Choose cycle and press GO pad.
Advance cycle to SPIN.
120 Volts between terminal "COM"
(common) on motor relay K3
and "P1" (neutral) on control?
120 Volts between terminals "P3"
(START/SPIN) and "P1" (neutral)
Zero Volts between terminals "P2"
(START/AGITATE) and "P1"
Problem is not related to
32283
Section 8 Service Procedures Unique to the Electronic Control Model Washers
Washer will not
spin properly?
YES
wiring?
NO
Loading Door Switch
YES
Motor Relay K3
YES
Motor Relay K2
on control?
YES
Motor Relay K1
(neutral) on control?
YES
electronic control.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
WARNING
YES
Correct wiring.
Inspect loading door
NO
switch.
NO
Replace control.
NO
Replace control.
NO
Replace control.
W003
83