ALLIANCE AA9231 Service page 77

Exit: Do any of the following.
1. Press any pad.
2. Open loading door for four seconds.
3. Unplug washer.
Pressure Switch
Red/Black (P6)
Hot Water
Valve
Orange (P7)
Cold Water
Valve
Gray (P8)
Ground
Green (P9)
Motor
Blue (COM)
32283
Section 8 Service Procedures Unique to the Electronic Control Model Washers
L1
Black (P5)
CONNECTION RELAY AND TRANSFORMER DIAGRAM
(ELECTRONIC CONTROL)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
NOTE:
1. This test routine will only light LEDs
pertaining to hardware model selected.
2. When last step in table is finished, routing
sequence will repeat.
3. Each output is on for two seconds.
L1
Black (P4)
Figure 55
Motor K2 Relay
Brown (P3)
Motor K1 Relay
Red (P2)
Neutral
White (P1)
Loading Door
Switch
Pink/Blue (N.O.)
75