Page 1
Washer-Extractors Cabinet Hardmount Refer to Page 9 for Model Identification Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No. D1599ENR14 www.alliancelaundry.com July 2021...
Replacement Parts If literature or replacement parts are required, contact the source from which the machine was purchased or contact Alliance Laun- dry Systems at +1 (920) 748-3950 for the name and address of the nearest authorized parts distributor.
Page 43
Suitable air cushions (risers) should be installed in supply lines to prevent “hammering.” Alliance Laundry Systems, LLC ranges of front loading commer- cial clothes washing machines have solenoid valves at the inlets. Minimum and maximum working pressure 1 bar and 8 bar. The machines are supplied with approved inlet hoses.
.5mm thick washer to the fixed lower hinge pin. The washer was included when the machine was delivered, but can be ordered from Alliance Laundry Systems under part number 571642. b. Try to turn the door in a clockwise or counterclockwise rotation.