1. Manuals
  2. Brands
  3. ALLIANCE Manuals
  4. Washer
  5. HWNNE2HP115CW01
  6. Original instructions manual

ALLIANCE HWNNE2HP115CW01 Original Instructions Manual

Topload washer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Topload Washer
Refer to Page 9 for Model Identification
MEDIUM
Soil
Cycle
Temp
TLW25C_SVG
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 204370ENR1
January 2019

Advertisement

Table of Contents
loading

Related Manuals for ALLIANCE HWNNE2HP115CW01

Summary of Contents for ALLIANCE HWNNE2HP115CW01

  • Page 1 Topload Washer Refer to Page 9 for Model Identification MEDIUM Soil Cycle Temp TLW25C_SVG Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No.
  • Page 3 Read all instructions before using unit. Hazardous voltage inside. Disconnect power before serv- icing. This product uses FreeRTOS V7.2.0 (www.freertos.org). © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 4: Table Of Contents

    Changing Cycles...................13 © Copyright 2019, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 5 Cycle Modifier Key 1 MEDIUM Vend Price Adder ACNP 1......39 Cycle Modifier Key 2 HEAVY Vend Price Adder ACNP 2....... 39 Vend Price Decimal Point Ats dP..............39 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 6 Special Vend 2 Days Enable SP2..............58 Special Vend 3 Days Enable SP3..............58 Special Vend 4 Days Enable SP4..............58 Cycle Modifier Programming CNP-..............58 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 7 How to Enter Testing Feature................. 70 How to Start Tests..................70 How to Exit Testing Feature ................70 Diagnostic (Testing) Mode – Quick Reference Chart........70 Diagnostic Test Descriptions................73 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 8 How to Begin Communications with an External Device......89 Card Reader Communications - Card Models Only.......... 89 Network Communications................89 Default Cycle Time ................90 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 9: Model Identification

    SWNNC2SP115TW02 SWNNY2HP115CW01 HWNNX2HP115CW01 SWNNE2HP115CW02 SWNNY2HP115TW01 HWNNX2SP115CW01 SWNNE2SP115CW02 SWNNY2SP115CW01 HWNNY2SP115CW01 SWNNX2HP115CW02 SWNNY2SP115TW01 SWNNC2HP115TQ01 SWNNX2HP115TW01 SWNWX2HP115TW02 SWNNC2HP115TW01 SWNNX2HP115TW02 SWNWX2SP115TW02 SWNNC2HP115TW02 SWNNX2HP115TW07 SWNWY2HP115TW01 SWNNC2HP115TW07 SWNNX2SP115CW02 SWNWY2SP115TW01 SWNNC2SP115TQ01 SWNNX2SP115TW01 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 10: Glossary Of Terms

    (for up to 10 years) until the electrical power software. Contact Alliance Laundry Systems for a list of ap- is restored. proved PDAs and other external devices.

  • Page 11: Control Identification

    2. SELECT CYCLE pads 3. SELECT Cycle Modifier pads 4. Six 7-Segment Digits 5. Display 6. LED Status Lights 7. LED Light 8. START pad Figure 1 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 12: Display Identification

    MEDIUM LED is lit when the Option MEDIUM modifier is se- lected. HEAVY LED HEAVY LED is lit when the Option HEAVY modifier is selec- ted. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 13: Washer Operation

    When one of these options occur, the display will second off for 10 seconds if Signal for Start is enabled. revert to the Ready Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 14: Changing Cycles

    Low Power/Shutdown Option. While in Shutdown Mode, the control will show oFF and all LEDs will be turned off. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 15: Power Failure Display Mode

    OPL cycle and the cycle is not able to automatically resume. If the user presses any key, Start Mode is entered. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 16: Special Features

    For detailed information on running diagnostic tests, refer to Test- These modes include Manual Programming, Audit Collection, ing Machine and Electronic Control Functions. Diagnostics, Rapid Advance, and Reset to Factory Defaults. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 17: Break-In Alarm

    Out of Order Mode is active. Refer to Out of Order oUt. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 18: Opening The Service Door

    “white/black” and “red/blue” wires. This will allow the user to access various programming options, diagnostics, and audit capa- bilities. Refer to Figure 2 . FLW6R_SVG1 1. Service Door 2. Control Panel Figure 2 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 19: Entering The Manual Mode

    8. To exit, press the WARM ( < ) keypad. The control will revert back to Ready Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 20 "rESEt" Manual Reset Manual Reset Mode. "diAg" Press the START keypad to Diagnostic enter Diagnostic Tests. Refer to Tests Diagnostic Tests flowchart. TLW17R_SVG Figure 3 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 21: Programming Control

    Coin #1 Value 1 - 65,535 dEn 1 Coin #2 Value 1 - 65,535 dEn 2 Start Pulse Value 1 - 65,535 PLSE Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 22 3 - 255 E Ld 1 Day of Week Water Leak Detection oFF, 0 - 127 E Ld 2 Number of Cycles Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 23 1 - 12 dLS 6 End Day of Week 1 - 7 dLS 7 End Week of Month 1 - 4 dLS 8 Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 24 0 - 65,535 SP1 14 Special Vend 1 Price 0 - 65,535 SP1 15 Special Vend 1 Price 0 - 65,535 SP1 16 Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 25 CNP- gramming Menu Default Cycle Modifier 0 - 2 CNP 1 Cycle Modifier Key # 0 - 1 CNP 2 1 Medium Options Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 26 0 - 10 CyCP 9 Time Delicate Rinse Agitate 0 - 10 CyCP10 Time Delicate Extra Rinse 0 - 10 CyCP11 Agitate Time Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 27 LUC 2 Lucky Cycle Display on/oFF LUC 3 Option Water Temperature In- — on/oFF tP ind dicator Programmable Close on/oFF PCdL d Lid Display Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 28 1 OPL Delayed Start on/oFF oPL 2 OPL Display Power on/oFF oPL 3 Save Drop Off Mode on/oFF droP Out of Order on/oFF © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 29 Heavy Vend Price Adder "AtS SL" Unused "AtS dP" Vend Price Decimal Point "dEn 1" Coin #1 Value "dEn 2" Coin #2 Value continued TLW46R_SVG Figure 4 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 30 "E nF-" "E nF 1" No Water Flow Error No Water Flow Error "E nF 2" No Water Flow Error Time continued FLW100R-b_SVG Figure 5 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 31 Slow Drain Slow Drain Detection Error Detection Error "E Sd 2" Slow Drain Detection Adjust "ovrFLd" Overflow Mode Display "CLrErr" Clear Error continued TLW18R_SVG Figure 6 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 32 Start Hour "dLS 6" End Month "dLS 7" End Day of Week "dLS 8" End Week of Month "dLS 9" continued End Hour TLW20R_SVG Figure 7 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 33 "SP1 14" Special Vend 1 Price #4 "SP1 15" Special Vend 1 Price #5 "SP1 16" Special Vend 1 Price #6 continued TLW15R-e_SVG Figure 8 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 34 Added Agitate Time to Wash Status Agitate Steps "CMP 7" Cycle Modifier Key #2 Added Agitate Time to Rinse Status Agitate Steps continued TLW15R-f_SVG Figure 9 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 35 Delicate EXTRA RINSE Agitate Time "CyCP12" "PF rst" Delicate FINAL SPIN Time Power Fail Reset "CyCP13" Warm Rinse Option "CyCP14" Timed Hot Fill/Spray Rinse continued TLW47R Figure 10 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 36: Vend Price 1 Ats 1

    OPL Mode Enable "droP " "oPL 2" Drop Off Mode OPL Delayed Start "oPL 3" "oUt " OPL Display Power Save Out of Order TLW15R-h_SVG Figure 11 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 37: Vend Price 2 Ats 2

    7. Press the START (enter) keypad when the correct value ap- pears in the display. The new value is saved and the next op- tion will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 38: Vend Price 5 Ats 5

    6. Press the DELICATES (∧) or the COLD (∨) keypad to in- the next digit. crease or decrease the value of the active digit and the START © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 39: Vend Price 9 Ats 9

    NOTE: To go back to the current programmable op- 4. When Ats dP appears in the display, press the START (en- tion without changing the value, press the WARM (<) ter) keypad. keypad. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 40: Coin 1 Value Den 1

    Manual Mode. value set up in Start Pulse Value until the vend is satisfied. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 41: Programmable Output Type Atype

    4. When AtyPE appears in the display, press the START (enter) keypad. A number will appear in the display. This number corresponds to the current Output Type Value. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 42: Default Cycle Dftcyc

    A number will appear in the display. This number 1. Control must be in Manual Mode. Refer to How to Enter the corresponds to the current Audio Signal Programming Value. Manual Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 43: How To Read Audio Signal Table

    Signal, use the following chart. The Signal Value column con- Serial or Net- work Vending Command Coin/Card In- Signal Value Start Mode Signal End of Cycle Key Pressed Table 4  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 44: Network Node Number Node

    3. Press the DELICATES (∧) or the COLD (∨) keypad to scroll in the display. through the programmable options until Error- appears in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 45 E dr 1 set error if empty water level isn't reached by the end of the cycle. If disa- bled will allow no alarm. Table 5  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 46 Call for service if an error will not clear. Table 5 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 47: Set Real-Time Clock Rtc

    AtS 1 will appear in the display. The owner may also turn the Special Vend 1 option on or off if desired. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 48: How To Read The Days Enable Value Table

    * The default value programmed at the factory is 0. SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 49 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 50 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 51 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 52 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 53: How To Program Special Vend 1 Start Minute Sp1 2

    The new value is saved and the next op- keypad. The current start month will appear in the display. tion will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 54: How To Program Special Vend 1 Start Year Sp1 6

    8 appears in the display. while programming. 2. When SP1 8 appears in the display, press the START (enter) keypad. The current end date will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 55: How To Program Special Vend 1 Vend Price 2 Sp1 12

    WARM (<) keypad. 3. Press the DELICATES (∧) or the COLD (∨) keypad to in- crease or decrease the value of the active digit and the START © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 56: How To Program Special Vend 1 Vend Price 7 Sp1 17

    4. Press the START (enter) keypad when the correct value ap- 18 appears in the display. pears in the display. The new value is saved and the next op- tion will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 57: How To Program Special Vend 1 Wash Status Agitate Steps Subtracted Minutes Sp1 21

    1. Press the DELICATES (∧) or the COLD (∨) keypad to scroll through the programmable Special Vend 1 options until SP1 26 appears in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 58: Special Vend 2 Days Enable Sp2

    SP3 appears in the Prog appears in the display. Press the START (enter) keypad, display. and AtS 1 will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 59: How To Program Cycle Modifier Medium Key #1 Options Cnp 2

    6. When CNP 2 appears in the display, press the START (enter) time option needs to be turned on for the Cycle Modifier MEDI- keypad. UM Additional Wash Time to take effect. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 60: How To Program Cycle Modifier Medium Additional Extra Rinse Time Cnp 5

    The new value is saved and the next op- keypad. A number will appear in the display corresponding to tion will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 61: Cycle Parameters Cycp

    Prog appears in the display. Press the START (enter) keypad, and AtS 1 will appear in the display. Delicate Wash Agitate Time CyCP 9 Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 62: Low Power-Auto Shutdown 3 Days Enable Lpas 3

    A value of Manual Mode. 0 will cause the cycle and vend to be lost any time a power fail- ure occurs. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 63: Ir Access Ira En

    Ft En appears in the 3. Press the DELICATES (∧) or the COLD (∨) keypad to scroll display. through the programmable options until rAPdEn appears in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 64: Lucky Cycle Luc

    PCdL appears in the fied. display. 4. When PCdL appears in the display, press the START (enter) Table 12 keypad. The current status will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 65: Programmable Push Start Display Ppst

    This option allows the owner to place the control in OPL Mode, the current status. in which no vend price needs to be satisfied in order to start the © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 66: Opl Delayed Start Opl 2

    = Option Disabled (factory default setting) oFF = Option Disabled (factory default setting) 7. Press the DELICATES (∧) or the COLD (∨) keypad to change the current status. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 67: Out Of Order Out

    6. Press the START (enter) keypad when the correct value ap- pears in the display. The new value is saved and the next op- tion will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 68: Collecting Audit Information

    Total Number of Start Pulses PULSE Total Number of Rapid Ad- rAPCyC vance Cycles Total Number of Run Hours rUnHrS Resettable Coin #1 Count rCoin1 Table 13  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 69: Manual Reset

    5. Press the DELICATES (∧) or the COLD (∨) keypad to change the value to yes. 6. Press the START (enter) keypad when the correct value ap- pears in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 70: Testing Machine And Electronic Control Functions

    Press the WARM (<) keypad until the display returns to the pre- vious mode of operation. * Tests can only be entered when in Start or Ready Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 71 Machine Configuration #3 Display Test d 31 C --- Machine Configuration #4 Display Test d 32 d --- Machine Configuration #5 Display Test d 33 E --- Table 14 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 72 Input Test Display Test "d 15" "d 33" Lid Switch Machine Configuration #5 Input Test Display Test "d 17" Show Fill Time Test TLW51R_SVG Figure 12 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 73: Diagnostic Test Descriptions

    The control will return to the Testing Mode. Lid Switch Input Test d 15 This test will display whether the washer lid is open or closed. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 74: Show Fill Time Test D 17

    PUrgE and the START (enter) keypad LED will flash. Begin the lit, the value is negative. test by pressing START (enter). If the lid is open, CLoSE, Lid © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 75: Configuration 1 Display Test D 29

    Each column of the table below contains a unique combination of the words “YES” and “NO” that indicates if that column’s con- nection is present. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 76 Board "A" Vend Con- Configura- Jumper Header Header nection Coin Drop Coin Drop tion Value Present Present Present Present #2 Present #1 Present Table 15  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 77 Board "A" Vend Con- Configura- Jumper Header Header nection Coin Drop Coin Drop tion Value Present Present Present Present #2 Present #1 Present Table 15  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 78: Configuration 2 Display Test D 30

    Payment System Present (ON) 240 Volt Supply (ON) Configuration Value Table 16 Configuration 5 Display Test d 33 This option is not used on this model. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 79: Factory Test

    S oP or S CL S oP is displayed when service door switch is open. S CL is displayed when service door switch is closed. Table 17  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 80 Auxilliary Output 3 The control energizes the Auxiliary Out- 0013 put 3. Auxilliary Output 4 The control energizes the Auxiliary Out- 0014 put 4. Table 17  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 81 Cycling power to the machine is the only way to resume normal operation and the control will stay in this state indefinitely until that time. Table 17 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 82: Error Codes

    The value in at least one of the programming options is invalid or out of range. Re- EC05 Range Data check the programming option’s value and try again. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 83 E nr Board Not Ready Drive/Output Hardware failure. Try cycling power to machine before replacing output board. E bS Board Shorted Machine ID Errors Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 84 START keypad 3 times in a period of 5 seconds or by cycling the power to the machine. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...
  • Page 85 E d xx Board Error drive board where xx represents an error code. Power down machine to clear. Call a service technician if error persists. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 86: Rapid Advance Feature

    NOTE: The Rapid Advance option must be turned on for Rapid Advance to work. How to Exit Rapid Advance Feature Advance through the cycle until reaching the Ready Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 87: Clear Vend Feature

    NORMAL cycle keypad with the other hand. The control will reset to the Ready Mode and clear out the current vend that has been entered. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 88: Power Fail Recovery

    Power Fail Reset option, and the Power Fail Reset option is turned on, the control will reset the cycle and lose all vending entered for the cycle. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 89: Communications Mode

    The Network Communications feature allows the washer control to communicate with a network. The washer control can be pro- grammed and have its data read without using the keypad. © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

  • Page 90: Default Cycle Time

    Final Spin Final Spin NORMAL = 7:00 PERM PRESS = 6:00 DELICATE = 5:00 Total Time NORMAL = 29:10 PERM PRESS = 28:10 DELICATE = 27:10 © Copyright, Alliance Laundry Systems LLC - Part No. 204370ENR1 DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Hwnne2sp115cw01Hwnnx2hp115cw01Hwnnx2sp115cw01Hwnny2sp115cw01Swnnc2hp115tq01Swnnc2hp115tw01 ... Show all

Table of Contents