Resetting The Nokia Ip60 Appliance To Defaults - Nokia IP60 User Manual

The Import Settings page displays the configuration file's content and the result of implementing each
configuration command.
Note: If the appliance's IP address changed as a result of the configuration import,
your computer may be disconnected from the network; therefore you may not be
able to see the results.

Resetting the Nokia IP60 Appliance to Defaults

You can reset the IP60 appliance to its default settings. When you reset your IP60 appliance, it reverts to
the state it was originally in when you purchased it.
Warning: This operation erases all your settings and password information. You will
have to set a new password and reconfigure your IP60 appliance for Internet
connection. For information on performing these tasks, see Setting Up the Nokia
IP60 Appliance on page 55.
This operation also resets your appliance to its default Product Key. Therefore, if you
upgraded your license, you should save your Product Key before resetting to defaults.
You can view the installed Product Key by in the Nokia IP60 Licensing Wizard. For
information on accessing this wizard, see Upgrading Your License on page 423.
You can reset the IP60 appliance to defaults via the Web management interface (software) or by manually
pressing the Reset button (hardware) located at the back of the IP60 appliance.
When resetting the appliance via the Nokia IP60 Portal, you can choose to keep the current firmware or to
revert to the firmware version that shipped with the IP60 appliance. In contrast, using the Reset button
automatically reverts the firmware version.
Chapter 19: Maintenance

Resetting the Nokia IP60 Appliance to Defaults

453