Nokia IP60 User Manual page 335

Configuring Web Filtering Advanced Settings
Note: If the IP60 appliance is remotely managed, contact your Service Center
administrator to change these settings.
To configure Web Filtering advanced settings
1. Click Services in the main menu, and click the Web Filtering tab.
The Web Filtering page appears.
2. Next to the Bypass scanning if Service Center is unavailable option, specify how the gateway
should handle Web Filtering when the service is enabled and the Service Center is unavailable,
by doing do one of the following:
To temporarily block all connections to the Internet, click
This ensures that users will not gain access to undesirable Web sites, even when the Service
Center is unavailable.
The button changes to
To temporarily allow all connections to the Internet, click
This ensures continuous access to the Internet.
The button changes to
When the Service Center is available again, the gateway will enforce the configured Web Filtering
policy.
Temporarily Disabling Web Filtering
If desired, you can temporarily disable the Web Filtering service.
To temporarily disable Web Filtering
1. Click Services in the main menu, and click the Web Filtering tab.
The Web Filtering page appears.
2. Click Snooze.
Web Filtering is temporarily disabled for all internal network computers.
Chapter 15: SMART Management and Subscription Services
.
.
.
.
Web Filtering
335