Nokia IP60 User Manual page 51

Preparing the IP60 Appliance for a Wireless Connection
To prepare the Nokia IP60 Wireless appliance for a wireless connection
1. Connect the antennas that came with your Nokia IP60 Wireless appliance to the ANT1 and
ANT2 antenna connectors in the appliance's rear panel.
2. Bend the antennas at the hinges, so that they point upwards.
Wall Mounting the IP60 Appliance
For your convenience, the IP60 appliance includes a wall mounting kit, which consists of two plastic
conical anchors and two cross-head screws.
To mount the IP60 appliance on the wall
1. Decide where you want to mount your IP60 appliance.
2. Decide on the mounting orientation.
You can mount the appliance on the wall facing up, down, left, or right.
Note: Mounting the appliance with the ports facing upwards is not recommended, as
dust might accumulate in unused ports.
Chapter 3: Installing and Setting Up the Nokia IP60 Appliance
Nokia IP60 and Nokia IP60 Wireless Installation
51