Nokia IP60 User Manual page 131

See Configuring a DHCP Server on page 113.
10. Click Apply.
A warning message appears.
11. Click OK.
A success message appears.
12. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
13. Next to the LAN port you want to assign, click Edit.
The Port Setup page appears.
14. In the Assign to network drop-down list, select the VLAN network's name.
You can assign more than one port to the VLAN.
15. Click Apply.
Adding and Editing Tag-Based VLANs
To add or edit a tag-based VLAN
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. Do one of the following:
To add a VLAN, click Add Network.
To edit a VLAN, click Edit in the desired VLAN's row.
The Edit Network Settings page for VLAN networks appears.
3. In the Network Name field, type a name for the VLAN.
4. In the Type drop-down list, select Tag Based VLAN.
The VLAN Tag field appears.
5. In the VLAN Tag field, type a tag for the VLAN.
This must be an integer between 1 and 4095.
6. In the Mode drop-down list, select Enabled.
The fields are enabled.
7. In the IP Address field, type the IP address of the VLAN network's default gateway.
Note: The VLAN network must not overlap other networks.
8. In the Subnet Mask field, type the VLAN's internal network range.
Chapter 6: Managing Your Network
Configuring Network Settings
131