Nokia IP60 User Manual page 433

Note: Configuring SNMP is equivalent to creating a simple Allow rule, where the
destination is This Gateway. To create more complex rules for SNMP, such as
allowing SNMP connections from multiple IP address ranges, define Allow rules for
the relevant port (by default, TCP port 161), with the destination This Gateway. For
information, see Using Rules on page 238.
To configure SNMP
1. Click Setup in the main menu, and click the Management tab.
The Management page appears.
2. Specify from where SNMP access should be granted.
See Access Options on page 430 for information.
If you selected Internal Networks + IP Range, additional fields appear.
The Community field and the Advanced link are enabled.
3. If you selected Internal Networks + IP Range, enter the desired IP address range in the fields
provided.
4. In the Community field, type the name of the SNMP community string.
SNMP clients uses the SNMP community string as a password, when connecting to the IP60 appliance.
The default value is "public". It is recommended to change this string.
5. To configure advanced SNMP settings, do the following:
Click Advanced.
a.
Chapter 19: Maintenance
Configuring SNMP
433