Nokia IP60 User Manual page 442

Using Diagnostic Tools
8. Type a name for the configuration file and click Save.
The *.cap file is created and saved to the specified directory.
9. Click Cancel to close the Packet Sniffer window.
Table 114: Packet Sniffer Fields
In this field... Do this...
Interface Select the interface from which to collect packets.
The list includes the primary Internet connection, the IP60 appliance
ports, and all defined networks.
Filter String Type the filter string to use for filtering the captured packets. Only
packets that match the filter condition will be saved.
For a list of basic filter strings elements, see Filter String Syntax on
page 443.
For detailed information on filter syntax, go to
http://www.tcpdump.org/tcpdump_man.html.
Note: Do not enclose the filter string in quotation marks.
If you do not specify a filter string, Packet Sniffer will save all packets on
the selected interface.
Capture only traffic Select this option to capture incoming and outgoing packets for this
to/from this gateway gateway only.
If this option is not selected, Packet Sniffer will collect packets for all
traffic on the interface.
442 Nokia IP60 Security Appliance User Guide