Cascading Your Appliance - Nokia IP60 User Manual

Security appliance

Hide thumbs Also See for IP60:

Table of Contents

Cascading Your Appliance

4. Insert the bolt into the Nokia IP60 Edge appliance's security slot, then slide the bolt to the

Closed position until the bolts holes are aligned.

5. Thread the anti-theft device's pin through the bolt's holes, and insert the pin into the main body

of the anti-theft device, as described in the documentation that came with your device.

The IP60 appliance protects all computers and network devices that are connected to its LAN and DMZ ports.

If desired, you can increase the appliance's port capacity by cascading hubs or switches.

To cascade the IP60 appliance to a hub or switch

1. Connect a standard Ethernet cable to one of the appliance's LAN ports or to its DMZ/WAN2 port.

The IP60 appliance automatically detects cable types, so you can use either a straight-through or

crossed Ethernet cable.

2. Connect the other end of the cable to an Ethernet hub or switch.

3. Connect additional computers and network devices to the hub or switch as desired.

Nokia IP60 Security Appliance User Guide