Connecting The Appliance To Network Printers; Setting Up The Ip60 Appliance; Setting Up The Nokia Ip60 Appliance - Nokia IP60 User Manual

Connecting the Appliance to Network Printers

In models with a print server, you can connect network printers.
To connect network printers
1. Connect one end of a USB cable to one of the appliance's USB ports.
If needed, you can use the provided USB extension cord.
2. Connect the other end to a printer or a USB 2.0 hub.
Warning: Verify that the USB devices' power requirement does not exceed the
appliance's USB power supply capabilities. Failure to observe this warning may
cause damage to the appliance and void the warranty.
For information on setting up network printers, see Setting up Network Printers on page 457.

Setting Up the IP60 Appliance

After you have installed the IP60 appliance, you must set it up using the steps shown below.
When setting up your IP60 appliance for the first time after installation, these steps follow each other
automatically. After you have logged on and set up your password, the Nokia IP60 Setup Wizard
automatically opens and displays the dialog boxes for performing the initial configuration of the router. If
desired, you can exit the Setup Wizard and perform each of these steps separately.
Chapter 3: Installing and Setting Up the Nokia IP60 Appliance

Connecting the Appliance to Network Printers

55