Workflow; Adding And Editing Bridges - Nokia IP60 User Manual

Workflow

Figure 16: Link Redundancy with STP

Workflow

To use a bridge
1. Add a bridge.
See Adding and Editing Bridges on page 162.
2. Add the desired internal networks to the bridge.
See Adding Internal Networks to Bridges on page 165.
3. Add the desired Internet connections to the bridge.
See Adding Internet Connections to Bridges on page 168.
4. If you enabled the firewall between networks on this bridge, add security rules and VStream
Antivirus rules as needed.
For information on adding security rules, see Adding and Editing Rules on page 241. For information
on adding VStream Antivirus rules, see Adding and Editing Vstream Antivirus Rules on page 313.

Adding and Editing Bridges

To add or edit a bridge
1. Click Network in the main menu, and click the My Network tab.
162 Nokia IP60 Security Appliance User Guide