Table of Contents
Advertisement
In this field...
Do this...
Port Range
To specify the port range to which the rule applies, type the start port
number in the left text box, and the end port number in the right text box.
Note: If you do not enter a port range, the rule will apply to all ports. If you
enter only one port number, the range will include only that port.
Protocol
Type the number of the protocol for which the rule should apply.
Number
Source
Select the source of the connections you want to allow/block.
To specify an IP address, select Specified IP and type the desired IP address
in the field provided.
To specify an IP address range, select Specified Range and type the desired
IP address range in the fields provided.
Destination
Select the destination of the connections you want to allow/block.
To specify an IP address, select Specified IP and type the desired IP address
in the text box.
To specify an IP address range, select Specified Range and type the desired
IP address range in the fields provided.
To specify the Nokia IP60 IP address, select This Gateway.
To specify any destination except the Nokia IP60 Portal and network
printers, select ANY.
If the current time
Select this option to specify that the rule should be applied only during
is
certain hours of the day.
You must then use the fields and drop-down lists provided, to specify the
desired time range.
Forward the
Select the destination to which matching connections should be forwarded.
connection to
To specify an IP address, select Specified IP and type the desired IP address
in the text box.
This field only appears when defining an Allow and Forward rule.
Chapter 12: Setting Your Security Policy
Using Rules
245
Advertisement
Table of Contents
Troubleshooting
