Nokia IP60 User Manual page 115

Configuring the DHCP Address Range
By default, the Nokia IP60 DHCP server automatically sets the DHCP address range. The DHCP address
range is the range of IP addresses that the DHCP server can assign to network devices. IP addresses outside
of the DHCP address range are reserved for statically addressed computers.
If desired, you can set the Nokia IP60 DHCP range manually.
To configure the DHCP address range
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the desired network's row, click Edit.
The Edit Network Settings page appears.
3. Do one of the following:
To allow the DHCP server to set the IP address range, select the Automatic DHCP range check
box.
To set the DHCP range manually:
1) Clear the Automatic DHCP range check box.
The DHCP IP range fields appear.
2) In the DHCP IP range fields, type the desired DHCP range.
4. Click Apply.
A warning message appears.
5. Click OK.
A success message appears
Chapter 6: Managing Your Network
Configuring Network Settings
115