Nokia IP60 User Manual page 369

In this field... Do this...
RSA SecurID Select this option to use an RSA SecurID token for VPN authentication.
Token
When authenticating to the VPN site, you must enter a four-digit PIN code
and the SecurID passcode shown in your SecurID token's display. The
RSA SecurID token generates a new passcode every minute.
SecurID is only supported in Remote Access manual login mode.
Table 92: VPN Login Fields
In this field... Do this...
Manual Login Click this option to configure the site for Manual Login.
Manual Login connects only the computer you are currently logged onto to
the VPN site, and only when the appropriate user name and password
have been entered. For further information on Automatic and Manual
Login, see, Logging on to a VPN Site on page 384.
Automatic Login Click this option to enable the IP60 appliance to log on to the VPN site
automatically.
You must then fill in the Username and Password fields.
Automatic Login provides all the computers on your internal network with
constant access to the VPN site. For further information on Automatic and
Manual Login, see Logging on to a VPN Site on page 384.
Username Type the user name to be used for logging on to the VPN site.
Password Type the password to be used for logging on to the VPN site.
Chapter 16: Working with VPNs
Adding and Editing VPN Sites
369