Nokia IP60 User Manual page 86

Using Internet Setup
New fields appear, depending on the check boxes you selected.
2. Click Apply.
The IP60 appliance attempts to connect to the Internet, and the Status Bar displays the Internet status
―Connecting‖. This may take several seconds.
Once the connection is made, the Status Bar displays the Internet status ―Connected‖.
Configuring a Dialup Connection
Note: To use this connection type, you must first set up the dialup modem. For
information, see Setting Up Modems on page 96.
1. In the Port drop-down list, do one of the following:
To configure a Dialup connection on the Serial port (using a connected RS232 modem), select
Serial.
To configure a Dialup connection on a USB port (using a connected USB modem), select
USBModem1.
86 Nokia IP60 Security Appliance User Guide