Table of Contents
Advertisement
2
Performing the Initial Configuration
To access inline help for a specific subject, click the Help icon next to the
subject. You can also click Help at the top of the Network Voyager window to
get inline help for the entire Network Voyager window. To close inline help,
click Close.
Using Nokia Network Voyager to Monitor a Nokia
IP1200 Series Security Platform
After you install and configure your Nokia IP1200 Series Security Platform,
you can use Network Voyager to monitor its operation. Click Monitor from
the Network Voyager home page to access the monitoring functions.
Using the Command-Line Interface to Manage
Your Security Platform
You can also use the Nokia IPSO-SX command-line interface (CLI), an
SSHv2-secured interface, to manage and configure Nokia IP security
platforms from the command line. Everything that you can accomplish with
Nokia Network Voyager you can also do with the CLI.
To enter the CLI mode
1. Connect to the security platform by using a terminal or console
2. Enter your admin username and password.
3. Enter
For further information about establishing a connection with and invoking the
CLI, see the Nokia CLI Reference Guide for IPSO-SX for the version of
IPSO-SX you are using.
50
connection. For information about this procedure, see
Connection"
on page 40.
to access the CLI.
clish
Nokia IP1200 Series Security Platform Installation Guide
"Using a Console
Advertisement
Table of Contents
