Nokia IP60 User Manual page 338

Email Filtering
Enabling/Disabling Email Filtering
To enable/disable Email Filtering
1. Click Services in the main menu, and click the Email Filtering tab.
The Email Filtering page appears.
2. Next to Email Antivirus, drag the On/Off lever upwards or downwards.
Email Antivirus is enabled/disabled.
Selecting Protocols for Scanning
If you are locally managed, you can define which protocols should be scanned for viruses and spam:
Email retrieving (POP3). If enabled, all incoming email in the POP3 protocol will be scanned.
Email sending (SMTP). If enabled, all outgoing email will be scanned.
Protocols marked with
Note: If the IP60 appliance is remotely managed, contact your Service Center
administrator to change these settings.
To enable virus and spam scanning for a protocol
1. Click Services in the main menu, and click the Email Filtering tab.
The Email Filtering page appears.
2. In the Options area, click
338
will be scanned, while those marked with
or next to the desired protocol.
will not.
Nokia IP60 Security Appliance User Guide