Nokia IP60 User Manual page 111

The Edit Network Settings page for the LAN network appears.
3. In the Mode drop-down list, select Enabled.
The fields are enabled.
4. If desired, change your IP60 appliance's internal IP address.
See Changing IP Addresses on page 111.
5. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 112.
6. If desired, configure a DHCP server.
See Configuring a DHCP Server on page 113.
7. Click Apply.
A warning message appears.
8. Click OK.
A success message appears.
Changing IP Addresses
If desired, you can change your IP60 appliance's internal IP address, or the entire range of IP addresses in
your internal network.
To change IP addresses
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the desired network's row, click Edit.
Chapter 6: Managing Your Network
Configuring Network Settings
111