Nokia IP60 User Manual page 77

The Internet Setup page appears.
3. Do one of the following:
To configure an ADSL connection using the internal ADSL modem, continue at Configuring
a Direct ADSL Connection on page Error! Bookmark not defined..
This option is available in ADSL models only.
To configure an Ethernet-based connection, continue at Configuring an Ethernet-Based
Connection on page 77.
To configure a Dialup connection, continue at Configuring a Dialup Connection on page 86.
To configure no connection, continue at Using No Connection on page 88.
Configuring an Ethernet-Based Connection
1. In the Port drop-down list, do one of the following:
To configure an Ethernet-based connection through the WAN port, select WAN.
To configure an Ethernet-based connection through the DMZ/WAN2 port, select WAN2.
This option is available in non-ADSL models only.
To configure an Ethernet-based connection through a LAN port, select the desired LAN port.
The selected port is automatically assigned to Internet use. For information on viewing a port's
assignment, see Viewing Port Statuses. on page 149
2. In the Connection Type drop-down list, select the Internet connection type you intend to use.
The display changes according to the connection type you selected.
Chapter 5: Configuring the Internet Connection
Using Internet Setup
77