Table of Contents
Advertisement
In this field...
Do this...
Standard
Click this option to specify that the rule should apply to a specific standard
Service
service or network service object.
You must then select the desired service or network service object from the
drop-down list.
Custom Service
Click this option to specify that the rule should apply to a specific non-
standard service.
The Protocol and Port Range fields are enabled. You must fill them in.
Protocol
Select the protocol (TCP, UDP, or ANY) for which the rule should apply.
Port Range
To specify the port range to which the rule applies, type the start port
number in the left text box, and the end port number in the right text box.
Note: If you do not enter a port range, the rule will apply to all ports. If you
enter only one port number, the range will include only that port.
If the
Select the source of the connections you want to allow/block.
connection
To specify an IP address, select Specified IP and type the desired IP address
source is
in the field provided.
To specify an IP address range, select Specified Range and type the desired
IP address range in the fields provided.
And the
Select the destination of the connections you want to allow or block.
destination is
To specify an IP address, select Specified IP and type the desired IP address
in the text box.
To specify an IP address range, select Specified Range and type the desired
IP address range in the fields provided.
To specify the Nokia IP60 Portal and network printers, select This Gateway.
To specify any destination except the Nokia IP60 Portal and network
printers, select ANY.
Chapter 14: Using VStream Antivirus
Configuring VStream Antivirus
317
Advertisement
Table of Contents
Troubleshooting
