Configuring Computers To Use Network Printers - Nokia IP60 User Manual

The Printer Setup page appears.
6. Write down the port number allocated to the printer.
The port number appears in the Printer Server TCP Port field. You will need this number later, when
configuring computers to use the network printer.
7. To change the port number, do the following:
Type the desired port number in the Printer Server TCP Port field.
a.
Note: Printer port numbers may not overlap, and must be high ports.
Click Apply.
b.
You may want to change the port number if, for example, the printer you are setting up is intended to
replace another printer. In this case, you should change the replacement printer's port number to the old
printer's port number, and you can skip the next step.
8. Configure each computer from which you want to enable printing to the network printer.
See Configuring Computers to Use Network Printers on page 459.

Configuring Computers to Use Network Printers

Perform the relevant procedure on each computer from which you want to enable printing via the Nokia
IP60 print server to a network printer.
Windows Vista
This procedure is relevant for computers with a Windows Vista operating system.
Chapter 20: Using Network Printers

Configuring Computers to Use Network Printers

459