Adding Internal Networks To Bridges - Nokia IP60 User Manual

In this field...
IP Address
Subnet Mask

Adding Internal Networks to Bridges

Note: In order to add a VLAN of any type (port-based, tag-based, VAP, or WDS link)
to the bridge, you must first create the desired VLAN.
For information on adding port-based VLANs, see Adding and Editing Port-Based
VLANs on page 130. For information on adding tag-based VLANs, see Adding and
Editing Tag-Based VLANs on page 131.For information on adding VAPs, see
Configuring Virtual Access Points on page 209. For information on adding WDS
links, see Configuring WDS Links on page 212.
To add an internal network to a bridge
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. Click Edit in the desired network's row.
3. In the Mode drop-down list, select Bridged.
New fields appear.
4. Complete these fields as described below.
Chapter 7: Using Bridges
Do this...
Type the IP address to use for this gateway on this bridge.
Note: The bridge must not overlap other networks.
Select this bridge's subnet mask.

Adding Internal Networks to Bridges

165